Відео

It's a copy I believe of the new facelook grill. I believe it's the only one that's made for the i4

@@mariuslaspaas can you please explain more what it is called and where to buy it

@@Willibeify I bought in from a shop in sweden. Just googled grill i4 g26

@@mariuslaspaas does the automated driving still work ? ( green steering wheel function) that drives the car a few seconds without touching steering wheel

@@Willibeify yes.

They did affect it some. But not that much.

I did do some work on it. I build a rollcage, new bushings and welded reinforcement in the rear subframe. I also replaced the pulley in the charger to rise boost, but right now I struggle to make it run right. I think maybe I have a vacuum leak somewhere trying to find it.

@@mariuslaspaas do you know how much hp it would be now?

@@mariuslaspaas and have you tried smoke testing it?

@@BJ-fk9sq no. I don't know. But it will not be a big increase. I don't dare to go high boost with stock motor

@@BJ-fk9sq Not yet. I do have a smoke tester now, will try it later today or tomorrow. Also I will delete the disa

Yes. 215 front and 245 rear

You just pry them off with a screwdriver. Then I adjust the length accordingly to the tuv papers.

It's made by fekzen.se in sweden

It's a c30 94. A bit older charger.

You need to adjust this out from what type of idle wheel you are running on the charger

They are imagewheels custom 3 piece wheels. They don't rub anywhere.

I have upgrade injectors. But only to 440cc I think it was. I know I mentioned it in the video

@@mariuslaspaas You did but bag says siemens s-400 and you talked about bosch. I was intrested the model they are if they are straight blug in so i can do price comparison.

@@winha1435 yes. Sorry I didn't realise I said Bosch intill now. The injectors are Siemens. But the plug is Bosch. They are direct swap. Siemens nr 9470199

@@mariuslaspaas these are really nicely priced, i just find hard source injector dead times and spesific data for these.

@@winha1435 yes. I know. Not much data on them. Maybe because they are used oem on volvo and saab i think.

I did put it on the length that's mentioned in the tuv papers.

It's a custom made 3" exhaust with 2 mufflers. Headers from Ebay. Intake is from m54b30. Yes. In this video I rund the oem 328i diff. 2.93 It's heavy and have to use 2.gear.

What do you want to know? 😊

Why would it throw a check engine light?

Thank you

Nice. It will be looking good

In this video I run the OEM 328i diff

@@mariuslaspaas how is it gearing ratios? I heard for e46 the 3.46 one is good for drifting opinions?

@@Xccord The oem one is 2.93 if I remember correctly. I swapped it for a X3 diff later with the supercharger. I think that's 3.64

@@mariuslaspaas Isn’t the battery sitting pretty low on the car so if you lower it does it scrape the bottom over bumps or you just go super slow?

@@mariuslaspaas how is ground clearence to battery 😊

It's not so many mods. But I added them in the description now 😊

Its 8x20 with 245.40.20 rear and 6.5x20 with 215.45.20 front

Thanks. Does it eats a lot of charge as compare with 155/70/19? @@mariuslaspaas

oh Thanks for reply. Are those BBS rims? I only have 60Ah, i wonder if it will affect my battery consumption coz now i charge every other day..@@mariuslaspaas

@@k4tilp they are imagewheels. Custom 3 piece wheels. They do affect your consumption a bit yes.

Depending on country I think. Hvite or yellow lights are ok here.

@@mariuslaspaas germany? hmm

@@mariuslaspaas what did you buy so you had yellow lights? how much did it cost. in germany you can get it for 1250€

@@Willibeify I replaced the led modules. I bought yellow chips made for the headlights. Then I bought new modules/heatsinks and replace the chips on them sp that I still have the oem ones laying in case I want to switch back. It's quite expensive mod for just the drl in a different color.

Thanks 😊

I think it's 3.64. I haven't had the car on dyno, but I guess about 250. I will test a different wheel on the charger to raise boost some next time.

Its 8x20 with 245.40.20 rear and 6.5x20 with 215.45.20 front

​@@mariuslaspaas any wheel spacers or lowering springs?

@@timothytowe9392 h&r lowering springs

It's from this place www.schaper-automotive.com/en/

They are from imagewheels. imagewheels.co.uk/

Mine car is using a Vf engineering supercharger

@@mariuslaspaas thank you

On the sides it's Maxton. The front one is a lip for g22. It's not a bolt on and need some modifications for fit well.

It's spider-man 2099

It seems nice. Very tight space to fit it, but once fittet it's good. I will test it on track this weekend. I have only driven it on frozen lakes until now.

​@@agdwhite5421I am just running 0.5 bar now. (7.2psi I think?)

@@mariuslaspaas Nice! With 0,5 you dont need to upgrade studs + HG decompression plate right? You must be around 300hp i think

@@agdwhite5421 no. The engine is stock. I have been thinking about swapping HG and studs maybe in the winter. To make some more boost.

Aww. That's not good 😕

Well. I did it because I found it easier. Also if you watch my other videos I have a project with turbo and more power in my volvo940. So it made me want to try supercharger on this one 😊

I've had my supercharger for a few years now and reliability is great

@@acef_performance8416 What boost your running? HP? Stock engine?

kompresor is more natural

Yes

Ahhh. You are sure you didn't break the cable? It's so fragile

Sorry late reply. The wing is from jcsportline. The wheels are mentioned in another comment here. 6.5x20 and 8x20

Thanks

Thanks for the comment 😊

www.ebay.com/itm/124975254892?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YzB8Z6mARqy&sssrc=2349624&ssuid=JrK-6HoAT-u&var=&widget_ver=artemis&media=COPY This is the one I bought. 😊

@@mariuslaspaas Opened the eBay link you shared. Just to confirm, Crystal Gear Shift Knob Kit M For BMW All Series F30 F31 F32 F10 F12 F01 F25 F26 Is this the one you bought?

@@nagasai756 Yes. I do belive its same for F series and G series. I asked the seller and he told me it fits. And it did :)

Hello I’ve been watching the video , so after 3 months have had any issues since installing the new shift knob?

@@Topdeal32 No issues with the new shifter 😊

@@connorschultz8074 yes. I disconnected both the 12v and the high voltage battery to be sure to avoid that.

@@GTPS3COM bonjour, avez-vous trouvé une solution car je viens d’avoir le même problème il reste bloqué sur P